Sanyo MBC-550 Series User Manual page 236

TIME
Purpose
Displays and sets the time.
Form
TIME [<hh>[:<mm>]]
Description
If the TIME command is entered without any
arguments, the following message is displayed:
1.
Current time is hh:mm:ss.cc
Enter new time:
Press the REURN key of you do not want to change the
time shown. A new time may be given as an option to
the time command as in: TIME 8:20
The new time must be entered using numerals only;
letters are not allowed. The allowed options are:
hh = 00-2*1
mm = 00-59
2. The hour and minute entries must be separated by
colons. You do not have to type the seconds <ss> or
hundredths of seconds <cc> options.
3. The system uses the time entered as the new time if
the options and separators are valid. If the options
or separators are not valid, the system displays the
message:
4-39