Sun Microsystems Ultra 60 Product Notes page 22

8. Replace any long PCI cards or UPA graphics cards (Figure 1–5 and Figure 1–6).
a. Position the card into the chassis.
b. Lower the card connector so that it touches its associated card slot on the
c. Grasping the two upper corners of the card, push the card straight down
d. Using a number 2 Phillips-head screwdriver, replace the screw securing the
9. Connect the AC power cord.
10. Detach the wrist strap.
11. Replace the side access cover (Figure 1–13).
a. Position the side access cover.
b. Engage the side access cover and the chassis hooks. Push the access cover
Sun Ultra 60 Product Note ♦ June 2000, Revision A
22
motherboard.
into the slot until the card is fully seated.
card bracket tab to the system unit chassis (not illustrated).
towards the system unit front.