Sun Microsystems Ultra 60 Product Notes page 18

Figure 1–11
12. Remove the DC switch assembly from the front panel (Figure 1–12):
a. Accessing the rear of the front panel and using a small flat-blade
b. Repeat Step a for the other side of the DC switch assembly.
c. Continue pressing the detent tab on alternate sides and pushing the DC
d. Remove the DC switch assembly from the front panel.
Sun Ultra 60 Product Note ♦ June 2000, Revision A
18
Removing and Replacing the Front Panel
screwdriver, press the detent tab on one side of the DC switch assembly
while pushing the switch toward the front of the front panel.
switch assembly toward the front until the DC switch assembly can be
removed from the housing.