Sun Microsystems Ultra 60 Product Notes page 12

Figure 1–6
6. Remove the PCI fan assembly (Figure 1–7):
a. Disconnect the PCI fan power harness from the motherboard.
b. Lift the locking tab.
c. Press the locking snap to disengage the locking snap from the chassis.
d. Disengage the studs from the chassis slots.
e. Remove the PCI fan assembly by moving it toward the chassis back, over,
Sun Ultra 60 Product Note ♦ June 2000, Revision A
12
Removing and Replacing a UPA Graphics Card
and lifting up.