Extron electronics Quantum Ultra Series User Manual page 76

Command
Resets
Reboot system and save
network settings
Reboot system and
discard network settings
System reset (soft reset)
Absolute system reset
but retain IP settings.
Absolute system reset
Quantum Ultra Videowall Processing System • Remote Configuration and Control
ASCII Command
(Host to Processor)
E }
1 BOOT Boot 1
E }
3 BOOT Boot 3
E } Zpx
ZXXX
Zpy
E }
ZY
E } Zpq
ZQQQ
Response
(Processor to Host)
]
]
Additional Description
Reboot the system and retain
the network settings.
Reboot the system and discard
the network setting changes.
Reset all device settings to
factory defaults.
The project file is deleted and
the unit is rebooted to commit
and clear video outputs. IP
configuration and picture files
remain untouched.
Set all device settings to factory
defaults except the IP address,
subnet mask, gateway
address, DHCP, and port
mapping.
The project file is deleted, the
picture folder is reset to default
images, and the unit is rebooted
to commit and clear video
outputs. The IP configuration
remains untouched.
Set all device settings plus
DHCP and the IP address to
factory defaults.
The project file is deleted, the
picture folder is reset to default
images, the IP configuration is
reset to default, and the unit is
rebooted to commit and clear
video outputs.
This command also removes the
initial factory-configured serial
number password, and resets it
to extron.
68