Fujitsu 1740 User Manual page 90

5
Attach the Quake Proof Stabilizer kit components to the front, side, and rear
of the expansion rack.
Attach the front and rear Quake Proof Stabilizer kit components of the expansion rack and
the side stabilizer previously removed from the existing rack to the expansion rack. Use the
bolts attached to the Quake Proof Stabilizer kit components and those removed from the
existing rack. At this stage, tighten the bolts only temporarily. They will need to be
tightened firmly after the mounting fixtures are attached.
The front and rear Quake Proof Stabilizer kit components each have three bolt holes. On
each side, the bolt for the one closest to the existing rack will be tightened together with the
mounting fixture later. So, leave that bolt unapplied for now.
(See the following page.)
'
90
Bolts that secure
the Quake Proof Stabilizer kit
components
Bolts that secure
the Quake Proof Stabilizer kit
components