■ Protecting the rack from falling over
CAUTION
For information on the stabilizer attaching procedure, see Section 3.4, "Installing the Rack."
■ Mounting a blank panel
CAUTION
Attach the blank panel to the parts of the rack where no devices are installed.
For information on the procedure for mounting the blank panel, see Section 4.6, "Blank Panel
Mounting Procedure."
78
・ When installing a rack that comes with stabilizers, be sure to attach the
stabilizers. If not, the rack may tip over when a device is drawn out from the rack.
・ When installing a rack that comes with no stabilizers, be sure to anchor the rack
to a stabilizing surface. The rack may tip over if it is not anchored to a stabilizing
surface.
・ If the blank panel is not mounted, the exhaust will be drawn into the device again
through the suction surface, which may result in device malfunction or a
shortened service life of the device.