Fujitsu 1740 User Manual page 119

4.3.3 Mounting the table
1
Secure the table to the M6 cage nuts that were attached in step 2 according
to Section 4.3.1, "Inserting cage nuts." Use M6 screws to secure the table
in position.
Start work after confirming that rear brackets L and R will not fall down when the
table is placed on them.
When mounting the table provisionally, ensure that the table is securely mounted
with the front hook fully inserted in the relevant square hole. Also, ensure that the
rear part of the table is securely mounted on rear brackets L and R.
Do not take away the supporting hand until the table is fixed in position.
4 Handling the Rack after Installation
E
119