Option Modules - ADTRAN NetVanta 7000 Series Hardware Installation Manual

NetVanta 7000 Series Hardware Installation Guide
4.

OPTION MODULES

The NetVanta 7000 Series supports several option modules designed to meet a variety of networking
requirements. The modules include plug-in network and voice interface modules (NIMs/VIMs).
NIMs/VIMs are cards that plug directly into the option module slots (labeled
) located on the rear of the base unit. These cards provide the following types of interfaces:
NIM/VIM
• NetVanta T1/FT1 NIM (P/N 1202862L1) on page 24
• NetVanta Dual T1 NIM (P/N 1200872L1) on page 25
• NetVanta E1/FE1 NIM (P/N 1200868E1) on page 26
• NetVanta E1/FE1 + G.703 NIM (P/N 1200878E1) on page 27
• NetVanta ADSL NIM, Annex A (P/N 1202869E1) on page 28
• NetVanta T1/PRI VIM (P/N 1200695G1) on page 29
• NetVanta E1/PRI VIM (P/N 1200696G1) on page 30
• NetVanta Quad FXS VIM (P/N 1200690E1) on page 31
• NetVanta Quad FXO VIM (P/N 1202691G1) on page 32
• NetVanta Dual FXS/FXO VIM (P/N 1202692G1) on page 33
This section describes each module, providing individual card specifications and features. Refer to
Pin Definitions on page 41
page 37 provides information on card installation.
61200796L1-34L
for pinout information. Installing Network Interface and Voice Interface Modules on
Copyright © 2014 ADTRAN, Inc.
Option Modules
and
SLOT 1 NIM/VIM SLOT 2
Connector
23