1. Manuals
  2. Brands
  3. aerauliqa Manuals
  4. Fan
  5. QR230E
  6. Installation manual

aerauliqa QR230E Installation Manual

Energy recovery ventilation unit with enthalpic heat exchanger
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
G
Telepítési kézikönyv (telepítői és felhasználói)
G
Installation Manual (installer & user)
QR230E
Installation Manual (installer & user)
QR230E
Energia visszanyeréses szellőztető
QR180MBP
Energy Recovery Ventilation Unit
berendezés entalpiás hőcserélővel
Heat Recovery Ventilation Unit
with enthalpic heat exchanger
Read this manual carefully before using the product and keep it in a safe place for
reference as necessary.
A készülék használata előtt gondosan tanulmányozzuk át a jelen útmutatót, majd későbbi használat céljából biztos helyen őrizzük meg.
Read this manual carefully before using the product and keep it in a safe
This product was constructed up to standard and in compliance with regulations relating to electrical equipment and must be installed by technically qualified
place for reference as necessary.
A készülék gyártása a vonatkozó szabványok szerint történt, a készülék megfelel az elektromos berendezésekre vonatkozó előírásoknak. Tele-
personnel.
This product was constructed up to standard and in compliance with regulations relating to electrical equipment and must be installed by technically qualified
pítését kizárólag szakképzett személy végezheti.
The manufacturer assumes no responsibility for damage to persons or property resulting from failure to observe the instructions contained in this manual.
personnel.
A gyártó elutasít bárminemű felelősségvállalást minden olyan anyagi kárra, személyi sérülésre vonatkozóan, amely jelen útmutatóban foglalt
The manufacturer assumes no responsibility for damage to persons or property resulting from failure to observe the instructions contained in this manual.
utasítások figyelmen kívül hagyása miatt következett be.
1 TARTALOMJEGYZÉK
1 INDEX
1 INDEX
1 Tartalom ...............................................................................................................................................................................................................................................................................1
2 Óvintézkedések ...............................................................................................................................................................................................................................................................2
1 Index
1 Index
2 Precautions
2 Precautions
3 Termékinformáció ..........................................................................................................................................................................................................................................................2
3 Product information
3 Product information
3.1 Általános tudnivalók ...........................................................................................................................................................................................................................................2
3.1 General
3.1 General
3.2 Méret és tömeg .....................................................................................................................................................................................................................................................3
3.2 Dimensions and Weight
3.2 Dimensions and Weight
3.3 Csatlakozások ..........................................................................................................................................................................................................................................................3
3.3 Connections
3.3 Connections
3.4 Space required
3.4 Helyigény ..................................................................................................................................................................................................................................................................3
3.4 Space required
3.5 Rating Label
3.5 Típustábla ................................................................................................................................................................................................................................................................4
3.5 Rating label
4 Transport and Storage
4 Transport and Storage
4 Szállítás és tárolás ...........................................................................................................................................................................................................................................................4
5 Installation
5 Installation
5 Telepítés ...............................................................................................................................................................................................................................................................................4
5.1 Unpacking
5.1 Unpacking
5.2 Where/how to install
5.1 Kicsomagolás ..........................................................................................................................................................................................................................................................4
5.2 Where/how to install
5.3 Ceiling installation
5.2 Hová/hogyan telepítse ......................................................................................................................................................................................................................................4
5.3 Ceiling installation
5.4 Electric Connections
5.3 Telepítés .....................................................................................................................................................................................................................................................................5
5.4 Electric Connections
6 Commissioning
5.4 Elektromos csatlakozások ................................................................................................................................................................................................................................6
6 Commissioning
6.1 Setting Fan speed
6.1 Setting Fan speed
6.2 Before Starting the System
6 Üzembe helyezés............................................................................................................................................................................................................................................................7
6.2 Before Starting the System
7 Operation
6.1 Ventilátor sebesség beállítás ..........................................................................................................................................................................................................................7
7.1 Single speed operation
7 Operation
6.2 Mielőtt elindítja a rendszert ............................................................................................................................................................................................................................8
7.2 Two speed operation
7.1 User Menu on CTRL-DSP
7 Használat .............................................................................................................................................................................................................................................................................9
7.3 Variable speed operation with CTRL-M remote manual controller (accessory on request)
7.2 Installer Menu on CTRL-DSP
7.4 Variable speed operation through external domotic (BMS) system or ballast potentiometer
7.1 A CTRL-DSP vezérlő kijelző felhasználói menüje ............................................................................................................................................................................ 10
7.3 Additional functionalities
7.5 Three speed operation with CTRL-S remote controller (accessory on request)
7.2 A CTRL-DSP vezérlő kijelző telepítési menüje .................................................................................................................................................................................. 12
8 Maintenance and service
7.6 Anti-frost functionality
8.1 Components list
7.3 Kiegészítő funkciók ........................................................................................................................................................................................................................................... 16
7.7 Bypass functionality
8.2 Description of Components
8 Karbantartás és javítás............................................................................................................................................................................................................................................... 16
8 Maintenance and service
8.3 Maintenance
8.1 Components list
8.1 Alkatrészlista ......................................................................................................................................................................................................................................................... 16
8.4 Service
8.2 Description of Components
8.2 Alkatrészek leírása.............................................................................................................................................................................................................................................. 17
8.5 Trouble shooting
8.3 Maintenance
8.3 Karbantartás .......................................................................................................................................................................................................................................................... 17
8.4 Service
8.4 Javítás . ..................................................................................................................................................................................................................................................................... 18
8.5 Trouble shooting
8.5 Hibaelhárítás ......................................................................................................................................................................................................................................................... 19
1
1
2
2
2
2
2
2
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
5
5
6
7
7
7
7
9
10
8
10
9
10
10
10
12
10
16
10
16
10
16
10
17
11
17
11
18
11
19
12
12
14
1
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the QR230E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for aerauliqa QR230E

Summary of Contents for aerauliqa QR230E

  • Page 1 Telepítési kézikönyv (telepítői és felhasználói) Installation Manual (installer & user) QR230E Installation Manual (installer & user) QR230E Energia visszanyeréses szellőztető QR180MBP Energy Recovery Ventilation Unit berendezés entalpiás hőcserélővel Heat Recovery Ventilation Unit with enthalpic heat exchanger Read this manual carefully before using the product and keep it in a safe place for reference as necessary.

  • Page 2: Szállítás És Tárolás

    Javítás céljából kizárólag eredeti, gyári tartalék alkatrészeket használjon. TERMÉKINFORMÁCIÓ Általános tudnivalók Ez a QR230E típusú hővisszanyeréses szellőztető egység telepítési kézikönyve. A kézikönyv a telepítésre, üzembe helyezésre, használatra és az üzemeltetésre vonatkozó alapvető információkat és ajánlásokat tartal- mazza, hogy biztosítsa az egység megfelelő hibamentes működését.
  • Page 3 3.2 Dimensions (mm) and Weight Méret (mm) és tömeg 3.2 Dimensions (mm) and Weight 3.2 Dimensions (mm) and Weight Weight Kg Tömeg (kg) Weight Kg Weight Kg Weight Kg 21,4 kapcsolódoboz fedél 3.3 Connections LEFT Connections from and to outside are set on the left side of the unit front view DEFAULT RIGHT Connections from and to outside are set on the right side of the unit front view...
  • Page 4 4 traNsPort aND storagE 4 traNsPort aND storagE 4 traNsPort aND storagE 4 traNsPort aND storagE WARNING WARNING WARNING WARNING SZÁLLÍTÁS ÉS TÁROLÁS Make sure that specific warnings and cautions in Chapter 2 “Precautions” are carefully read, understood and applied! Make sure that specific warnings and cautions in Chapter 2 “Precautions”...

  • Page 5: Electric Connections

    To connect the the CTRL-DSP to the mother board use a 4pole twisted-pair cable: max length 30m. A QR230E belső bekötése gyárilag megtörtént. A CTRL-DSP vezérlő kijelző alaplapra való csaltakoztatásához legfeljebb 30 méter hosszú, Figures below show the wiring diagram.
  • Page 6 ÜZEMBEHELYEZÉS 6 COMMISSIONING sIoNINg 6 commIssIoNINg 6.1 Setting Fan speed Ventilátor sebesség beállítás The speed of the unit can be adjusted during installation according to required ventilation rate. an speed 6.1 Setting Fan speed A szellőztetés kívánt arányának megfelelően a beszerelés során beállítható a készülék működési sebessége. Figure 6.a nit can be adjusted during installation according to required ventilation rate.

  • Page 7: Operation

    Lw DB - HANGTELJESÍTMÉNYSZINT OKTÁVSÁV Lp dB(A) Lw dB - SOUND POWER OCTAVE BAND Lp dB(A) Külső levegő beszívás Befúvás Intake Supply Elszívás Kifúvás (külső légtérbe) Extract Kitörés Exhaust Lw DB - HANGTELJESÍTMÉNYSZINT OKTÁVSÁV Breakout Lp dB(A) 3.2 Dimensions (mm) and Weight Lp dB(A) Lw dB - SOUND POWER OCTAVE BAND Külső...
  • Page 8 Fig. 7.b CTRL-DSP Fig. 7.b CTRL-DSP Fig. 7.b CTRL-DSP 7.b. ábra CTRL-DSP vezérlőpanel Fig. 7.b CTRL-DSP Dátum: az aktuális dátumot mutatja FELFELÉ LÉPÉS a menü választásban to go UP with the menu selection to go UP with the menu selection DATE: shows the current date to go UP with the menu selection DATE: shows the current date...

  • Page 9: Holiday Mode

    To exit the user menu press ESC or wait for about 60 seconds. To exit the user menu press ESC or wait for about 60 seconds. 7.1 User Menu on CTRL-DSP To enter the user menu press OK or ESC. User menu User menu A CTRL-DSP vezérlőpanel felhasználói menüje...
  • Page 10 User menu It can be selected only if the FILTER icon is displayed (Fig.7.b - 1 Mode Selection Press OK to select. It allows to reset the filter alarm after maintenance/replacement. User menu Karbantartás/csere után törölhetjük a szűrő figyelmeztetést (nullázhatjuk a számlálót). 2 Boost It allows to reset the filter alarm after maintenance/replacement.
  • Page 11 5 Free Cooling Cooling A gyári beállítás („DEFAuLT”) a „YES” (igen), mivel a QR230E egy beépített fizikai The factory setting (DEFAULT) is YES because the QR230E is equipped with an Installer menu The factory setting (DEFAULT) is YES because the QR230E is equipped with an Installer menu megkerülővezetékkel van ellátva.

  • Page 12: Installer Menu

    Fűtés küszöb: az opció csak akkor jelenik meg, ha a Heating (Fűtés) a PRE (ELŐ) vagy POST This option displays only if “Heating” is set on PRE or POST. Installer menu (uTÓ) opcióra van állítva. Beállíthatja a fűtési küszöbértéket az PRE (ELŐ) és POST (uTÓ) opciók It allows to set the heating threshold in case of PRE or POST heating.
  • Page 13 Szűrő figyelmeztetés gyakoriság: beállíthatja a Szűrő figyelmeztetés időtartamát: a rend- It allows to set the Filter Alarm period: the system has a timer which activates the “Filter” warning on the It allows to set the Filter Alarm period: the system has a timer which activates the “Filter” warning on the Installer menu Installer menu szerben időzítő...

  • Page 14: Maintenance And Service

    Kiegészítő funkciók 7.3 Additional functionalities SZOLGA ÜZEMMÓD Amennyiben a berendezés áram alá helyezése előtt a SZOLGA jumper (5.g. ábra - JP2) rövidre zárt, akkor a berendezés SZOLGA ÜZEM- SLAVE MODE MÓDBAN működik; az üzemi sebességet a SZOLGA bemeneten kapott 1-10V-os jel határozza meg. Az Üzemmód kiválasztásban leírt In case the SLAVE jumper (Fig.5.f - JP2) is short-circuited before powering the unit, the unit works in SLAVE MODE;...

  • Page 15: Alkatrészek Leírása

    Condensation drainage Alkatrészek leírása Depending on the relative humidity in the extract air, condensation may occur on the cold s other side in summer time (table 6.b). Ventilátorok The condensate water is led out through drainage pipe. A ventilátorok EC típusú külső rotoros motorok, melyek egyedileg fokozatmentesen vezérelhetők 10-100% között. A motor csapágyai ke- 8.2 Description of Components 8.2 Description of Components nést és karbantartást nem igényelnek.
  • Page 16 8.4 Service rvice 8.4 Service rvice 8.4 Service rvice 8.4 Service rvice Javítás WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING Make sure that the mains supply to the unit is disconnected before performing any installation, service, maintenance or electrical work! Make sure that the mains supply to the unit is disconnected before performing any installation, service, maintenance or electrical work! VIGYÁZAT! Make sure that the mains supply to the unit is disconnected before performing any installation, service, maintenance or electrical work!

  • Page 17: Troubleshooting

    It allows to set the Bypass/Free Cooling operation parameters Press OK to enter. Use  or  to choose “Desired Temperature”, “Tmax Free Heating”, “Tmin Free Cooling” For definitions see “Free Cooling”, paragraph 7.3. Press OK to select. The setting ranges are: Desired Temperature: 15°C ÷...
  • Page 18 ErP direktíva – 1253/2014, 1254/2014 rendelkezés AERAULIQA Gyártmány QR230E Modell SEC osztály SEC meleg klíma környezet kWh/m2.a -14,6 -10,4 -6,6 SEC átlagos klíma környezet kWh/m2.a -37,6 -32,3 -27,8 SEC hideg klíma környezet kWh/m2.a -73,1 -60,1 Energiacímke Készülék típusa otthoni - kétirányú...
  • Page 19 Sede operativa/Warehouse-Offices: via Mario Calderara 39/41, 25018 Montichiari (Bs) - Sede legale/Registered office: via Corsica 10, 25125 Brescia C.F. e P.IVA/VAT 03369930981 - REA BS-528635 - Tel: +39 030 674681 - Fax: +39 030 6872149 - www.aerauliqa.it - info@aerauliqa.it Aerauliqa fenntartja a jogot, hogy külön értesítés nélkül módosítson akár a termékeken, akár a használati útmutatókon.
  • Page 20 Installation Manual (installer & user) QR230E Energy Recovery Ventilation Unit with enthalpic heat exchanger Read this manual carefully before using the product and keep it in a safe place for reference as necessary. This product was constructed up to standard and in compliance with regulations relating to electrical equipment and must be installed by technically qualified personnel.

  • Page 21: Product Information

    The key to proper, safe and smooth operation of the unit is to read this manual thoroughly, use the unit according to given guidelines and follow all safety requirements. The QR230E is supplied with its CTRL-DSP remote multifunction control panel as standard.

  • Page 22: Space Required

    3.2 Dimensions (mm) and Weight Weight Kg 3.3 Connections Fig. 3.a Connections INTAKE EXTRACT Intake air from outiside Exhaust air to outside Supply air to inside Extract air from inside EXHAUST SUPPLY 3.4 Space required Make sure that enough space is left around the unit to allow easy maintenance (access to filters, terminal box and inspection panel removal). 3.5 Rating label Fig.3.b Rating label...

  • Page 23: Transport And Storage

    4 traNsPort aND storagE WARNING Make sure that specific warnings and cautions in Chapter 2 “Precautions” are carefully read, understood and applied! The appliance is delivered in one carton box. The appliance should be stored and transported in such a way that it is protected against physical damage that can harm spigots, casing, display etc. It should be covered so that dust, rain and snow cannot enter and damage the unit and its components.
  • Page 24 The installation and service of the unit and complete ventilation system must be performed by an authorized installer and in accordance with local rules and regulations. The unit must be earthed. The QR230E is wired internally from factory. To connect the the CTRL-DSP to the mother board use a 4pole twisted-pair cable: max length 30m. Figures below show the wiring diagram.
  • Page 25 6 commIssIoNINg 6.1 Setting Fan speed The speed of the unit can be adjusted during installation according to required ventilation rate. Figure 6.a below shows performance curves (for supply air and extract air) at different settings of the 0-10V signal to the motors. Airflow and consumption refer to one single motor.

  • Page 26: Before Starting The System

    Lw dB - SOUND POWER OCTAVE BAND Lp dB(A) Intake Supply Extract Exhaust Breakout Lw dB - SOUND POWER OCTAVE BAND Lp dB(A) Intake Supply Extract Exhaust Breakout Table 6.b Sound level dBA figures are average spherical free-field, for comparitive use only. 6.2 Before Starting the System When the installation is finished , check that: •...
  • Page 27 Fig. 7.b CTRL-DSP to go UP with the menu selection DATE: shows the current date to power off the ventilation unit MODE: shows the operation mode SPEED: shows the selected speed shows ERROR ALARM - see point 7.3 to check the type of error TIME: shows the time this symbol shows if the “bypass”...
  • Page 28 7.1 User Menu on CTRL-DSP To enter the user menu press OK or ESC. To exit the user menu press ESC or wait for about 60 seconds. Use  or  to select the menu. User menu Press OK to enter. 1 Mode Selection 2 Boost 3 Boost Duration...
  • Page 29 It allows to reset the filter alarm after maintenance/replacement. User menu It can be selected only if the FILTER icon is displayed (Fig.7.b - 1 Mode Selection Press OK to select. 2 Boost 3 Boost Duration 4 Reset FILTER Alarm 5 Night Mode 6 Installer menu It allows to deactivate the automatic operation of the speed increased via sensors during nocturnal hours.

  • Page 30: Installer Menu

    Press OK for setting and again to confirm. Press ESC to go back to the previous menu. 3 Bypass 4 Bypass settings 5 Free Cooling The factory setting (DEFAULT) is YES because the QR230E is equipped with an Installer menu integral physical bypass. 1 Language 2 Date/Time...
  • Page 31 This option displays only if “Heating” is set on PRE or POST. Installer menu It allows to set the heating threshold in case of PRE or POST heating. 6 Heating Press OK to enter. 7 Heating Threshold Use  or  to set the temperature. Press OK to select.
  • Page 32 It allows to set the Filter Alarm period: the system has a timer which activates the “Filter” warning on the Installer menu LCD at regular intervals. 11 F7 filter Press OK to enter. 12 Filter Alarm interval Use  or  to choose among 2-3-6 months or OFF. Press OK to select.

  • Page 33: Additional Functionalities

    7.3 Additional functionalities SLAVE MODE In case the SLAVE jumper (Fig.5.f - JP2) is short-circuited before powering the unit, the unit works in SLAVE MODE; the operating speed is determined by the 1-10V signal received at the SLAVE input. All the operating logics described in the Mode selection are ignored (paragraph 7.1). FREE COOLING The parameters “Desired Temperature”, “Tmax Free Heating”, “Tmin Free Cooling”...

  • Page 34: Description Of Components

    8.2 Description of Components Fans The fans have external rotor motors of EC type which can be steplessly controlled individually between 10–100%. The motor bearings are life time lubricated and maintenance free. It is possible to easily disconnect and replace the fans if necessary. Filters The filters are of filter quality G4 for both the supply air and extract air filter.
  • Page 35 8.4 Service WARNING Make sure that the mains supply to the unit is disconnected before performing any installation, service, maintenance or electrical work! WARNING The installation and service of the unit and complete ventilation system must be performed by an authorized installer and in accordance with local rules and regulations.
  • Page 36 Fig. 8.n Fig. 8.o 8.5 Trouble shooting Fans do not start 1. Check that main supply gets to the unit. 2. Check that all connections are working (all connections in terminal box and fast couplings of intake and exhaust air fans). Reduced airflow 1.
  • Page 37 ErP Directive - regulations 1253/2014 - 1254/2014 AERAULIQA Mark QR230E Model SEC class SEC warm climates kWh/m2.a -14,6 -10,4 -6,6 SEC average climates kWh/m2.a -37,6 -32,3 -27,8 SEC cold climates kWh/m2.a -73,1 -60,1 Energy label Unit typology Residential - bidirectional...
  • Page 38 NOTE...
  • Page 39 Sede operativa/Warehouse-Offices: via Mario Calderara 39/41, 25018 Montichiari (Bs) - Sede legale/Registered office: via Corsica 10, 25125 Brescia C.F. e P.IVA/VAT 03369930981 - REA BS-528635 - Tel: +39 030 674681 - Fax: +39 030 6872149 - www.aerauliqa.it - info@aerauliqa.it AERAulIqA SRl reserves the right to modify/make improvements to products and/or this instruction manual at any time and without prior notice.

Table of Contents