Stanley FatMax TruLaser TLM 300 User Manual page 27

D
Trapezoid function
GB
Angle function
Battery life,
F
Type AA, 2 x 1.5V
IP rating
I
E Dimension
Weight (with batteries)
P
Temperature range:
Storage
NL
Operating
DK
* maximum deviation occurs under unfavourable conditions
S
such as bright sunlight or when measuring to poorly
reflecting or very rough surfaces. For distances over 30 m the
maximum deviation may increase by ± 0.1 mm/m to a
N
maximum of ± 10 mm.
FIN
Measuring Conditions
J
Measuring Range
CN At night, at dusk and when the target is shadowed
the measuring range without target plate is
ROK
increased.
Use a target plate to increase the measurement
PL
range during daylight or if the target has a bad reflec-
tion.
HR
Measuring Surfaces
H
Measuring errors can occur when measuring toward
colourless liquids (e.g. water) or dust free glass,
RUS
styrofoam or similar semi-permeable surfaces.
CZ
Appendix
GR
up to 10 000
measurements
IP 54
splash proof, dust proof
148 x 64 x 36 mm
~ 250 g
-25°C to +70°C
(-13°F to +158°F)
-10°C to +50°C
(-14°F to +122°F)
10
Aiming at high gloss surfaces deflects the laser beam
and measurement errors can occur.
Against non-reflective and dark surfaces the
measuring time can be increased.
Care
Do not immerse the unit in water. Wipe off dirt with
a damp, soft cloth. Do not use aggressive cleaning
agents or solutions. Treat the optical surfaces with
the same care that you would apply to eyeglasses
and cameras.
Warranty
The Stanley TLM 300 comes with a two (2) year
warranty from Stanley. For more information on the
warranty please go to: www.stanleyworks.com.
In case of any questions concerning the warranty
please contact the dealer who you purchased the
instrument from.
All illustrations, descriptions and technical specifica-
tions are subject to change without prior notice.
Stanley TLM 300 1.0.0 gb