Table of Contents
Advertisement
Table of Contents
- - - - - - - - - - - - - - - - - - - - - - - 2
Introduction- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2
Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2
Display - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3
Insert batteries - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
Switching ON/OFF - - - - - - - - - - - - - - - - - - - - - - - - - 4
Clear - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
Message Codes - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
Adjusting measuring reference - - - - - - - - - - - - - - - - - 4
Distance unit setting - - - - - - - - - - - - - - - - - - - - - - - - 5
Multifunctional endpiece- - - - - - - - - - - - - - - - - - - - - - 5
Measuring single distance - - - - - - - - - - - - - - - - - - - - 6
Permament measuring- - - - - - - - - - - - - - - - - - - - - - - 6
Add / Subtract - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6
Area- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7
Volume- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7
Pythagoras (2-point) - - - - - - - - - - - - - - - - - - - - - - - - 8
Pythagoras (3-point) - - - - - - - - - - - - - - - - - - - - - - - - 8
Memory (5 last results) - - - - - - - - - - - - - - - - - - - - - - 9
- - - - - - - - - - - - - - - - - - - - - - - - - 10
- - - - - - - - - - - - - - - - - - - - - - - - 11
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11
- - - - - - - - - - - - - - - - - - - - - 11
Areas of responsibility - - - - - - - - - - - - - - - - - - - - - - 11
Permitted use - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12
- - - - - - - - - - - - - - - - - - - 6
Prohibited use - - - - - - - - - - - - - - - - - - - - - - - - - - - -12
Hazards in use - - - - - - - - - - - - - - - - - - - - - - - - - - -12
Limits of use - - - - - - - - - - - - - - - - - - - - - - - - - - - - -12
Disposal - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -12
Electromagnetic Compatibility (EMC) - - - - - - - - - - - -12
FCC statement (applicable in U.S.) - - - - - - - - - - - - -13
Laser classification- - - - - - - - - - - - - - - - - - - - - - - - -13
Labelling - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -13
Stanley TLM165I
EN
1
Advertisement
Table of Contents
Related Manuals for Stanley TLM165I
Summary of Contents for Stanley TLM165I
-
Page 1: Table Of Contents
Areas of responsibility - - - - - - - - - - - - - - - - - - - - - - 11 Permitted use - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12 Stanley TLM165I... -
Page 2: Instrument Set-Up
Subtract Memory Important paragraphs which must be adhered to in practice as they enable the product to be used in a technically correct and efficient manner. Measuring Clear / Off reference / Unit Stanley TLM165I... -
Page 3: Display
Insert batteries To ensure a relia- ble use, do not use zinc-carbon Battery Pythagoras batteries. Change batteries when battery Area / symbol is flash- Memory Volume ing. Measuring reference Info Min/Max Measuring Addition / Units Subtraction Main line Stanley TLM165I... -
Page 4: Operations
Device is Undo last action. turned OFF. Adjusting measuring reference Distance is measured from the Distance is measured from the pin front of the device. of the endpiece. Distance is measured from the rear of the device (standard setting). Stanley TLM165I... -
Page 5: Distance Unit Setting
Operations Distance unit setting Switch between the following units: 2 sec 0.000m 0'00" 1/16 0 in 1/16 Multifunctional endpiece Stanley TLM165I... -
Page 6: Measuring Functions
The same process can be The next meas- The next meas- used for adding or subtracting urement is added urement is sub- areas or volumes. 5.5I5 7.332 to the previous tracted from the I2.847 one. previous one. Stanley TLM165I... -
Page 7: Area
Volume Aim laser at first Aim laser at sec- Aim laser at third target point. ond target point. target point. The result is shown in the main line and the measured value above. 78.694 Stanley TLM165I... -
Page 8: Pythagoras (2-Point)
Aim laser at lower point. per point. tangular point. The result is shown in the main line and the measured distance above. Pressing the measuring key for 2 sec in the function activates automatically Minimum or Maxi- mum measurement. 8.294 Stanley TLM165I... -
Page 9: Memory (5 Last Results)
Measuring Functions Memory (5 last results) 5 last results are Navigates trough displayed. 5 last results. 8.294 8.294 Stanley TLM165I... -
Page 10: Technical Data
104 x 58.8 x 29.6 mm 4.25 x 2.31 x 1.17 in Weight (with batteries) 100 g / 3.53 oz Temperature range: - Storage -25 to 70 °C -13 to 158 °F - Operation -10 to 50 °C 14 to 122 °F Stanley TLM165I... -
Page 11: Message Codes
Clear button and Warranty Responsibilities of the manufacturer observe the following instructions: of the original equipment: Cause Correction The Stanley TLM has a two-year warranty. Stanley Tools For further information on this, contact Calculation error Perform measurement 701 E. Joppa Road again. -
Page 12: Permitted Use
Do not use the product in explo- requirements of the relevant standards • Aiming directly in the sun sion hazardous areas or in aggressive and regulations. environments. Yet, the possibility of causing interference in other devices cannot be totally excluded. Stanley TLM165I... -
Page 13: Fcc Statement (Applicable In U
CAUTION receiver is connected. Looking into the laser beam may be • Consult the dealer or an experienced hazardous to the eyes. radio/TV technician for help. Attach the laser sticker (a) of your country language. Stanley TLM165I...
Need help?
Do you have a question about the TLM165I and is the answer not in the manual?
Questions and answers