Use Of Virtual Wall; Border Tape - ECOVACS Deepoo ECO D58 Instruction Manual

USE OF VIRTUAL WALL

11. BORDER TAPE

Usage of Border Tape
Border Tape is used to confine the cleaning area. Deepoo will not proceed beyond the border,
allowing Deepoo to clean a designated area.
ENG - 122
It can be used to control the robot working within room or
the certain region you want it to clean. It applies invisible infrared
beam to get 2 meters optical band, which forms a blocked open
area, such as doorway of the room, corridor and staircase. You
can apply virtual wall to stop robot getting close to the wire of
domestic appliances or computer and precision object.
• Virtual wall can be put at the entrance of block region. You are
allowed to combine several walls together if necessary.
• The beam of virtual wall would form a conical-shaped region
to block robot. The wall shall have beam around itself to prevent
robot from getting closer to it.
If you find the indicator becomes weaker or that robot is able to
enter blocked region, please examine the battery of virtual wall.
Change into new battery if necessary.
• Clean the area where you plan to paste the Border Tape
with a dry cloth.
• Unroll the Border Tape and cut the length according to your
needs.
• Paste the Border Tape on the floor after tearing off the whi-
te layer on one side.
• Rub the Border Tape with Border Enhancement Tool.