Appointment Timing; Appointment Time Setting - ECOVACS Deepoo ECO D58 Instruction Manual

8. APPOINTMENT TIMING

APPOINTMENT TIME SETTING

First time setting
Tips:
• Selection scope: hour is between 0 and 23,
minute is between 0 - 59
• Under normal circumstance, time display on
LCD shows current time.
Second time setting
Tips:
• Selection scope: hour is between 0 and 23,
minute is between 0 - 59
• Under normal circumstance, time display on
LCD shows current time.
• If you need to cancel first or second timing.
please repeat set cleaning time, set the time
as 00: 00.
ENG - 118
1) After power is on, keep press
around 3 seconds then start first time
setting. on LCD is light and the
number with time setting is flashing.
2) Set hour and minute via  and ,
each time press  will increase one
hour or minute. While decrease one
hour and minute for . For confirm
setting and continue press
3) When you finish setting first time, press
again, and then go to second time
setting.
FOR EXAMPLE:
Set current time
as 12:07 pm,time
display on LCD
should be:
1) Now, the label
the number with time setting is flashing
2) Set hour and minute  and , each
time press  will incrase on hour or minu-
te. While decrease one hour and minute
for  . For confirm setting and continue
press .
3) Press again, and then go to current
time setting.
For example:
Set current time
as 2:08 am,time
display on LCD
should be
for
.
high light and