C H A P T E R F O U R
When you see alternating displays, the LCD sometimes alternates between the
currently selected option, and a help message giving brief instructions about how
to proceed. The display you'll probably see most often is shown below, showing
you, when you place a document in the feeder, that you can dial a number and
send a fax, or you can make a copy.
FAX: NO. & START
COPY: PRESS COPY
Function Selection Table
If you have a basic understanding of how to program a fax machine, you can
perform most of the programming settings without the Owner's Manual. To help
you understand the function selections, options, and settings that are found in
your fax programs, use the Function Selection Table below.
1. TEMP. SETTINGS
3. CALL RESERVE
6. OVERSEAS MODE
Send documents later.
Retrieve faxes from another
You can send a fax, then speak.
Change lightness or darkness
of fax you're sending.
Allows you to change resolution
page by page.
Adjusts for sometimes difficult
Automatically sends coverpage
Factory Set More Info
pp. 34, 52