7
C H A P T E R
Advanced
Fax Operation
Sending Faxes
Quick Scan Fax Transmission
You can scan a fax into the machine's memory to be sent as soon as the scan is
complete. This way, you don't have to wait for the entire fax to be transmitted
before you retrieve your original.
If you get a "MEMORY FULL" message while scanning the first page of a fax,
press
scanning in a subsequent page, you'll have the option to press
the pages scanned so far, or to press
1
2
3
4
Daily Timer
You can use this function to send a fax at a set time every day. The setting stays
the same until you change it.
1
2
3
S E V E N
Stop
to cancel the scan. If you get a "MEMORY FULL" message while
Insert the document in the feeder.
Press
Q.Scan
. The screen indicates how much memory is available.
Enter the fax number.
Start
Press
to begin scanning the document into memory. Once the scan is
complete, the fax machine dials the call.
Press
Function
,
,
.
7
2
Use the keypad to enter the time in 24-hour format (for example, enter 19:45
for 7:45 PM).
Wait 2 seconds, then press
Stop
to cancel the Quick Scan operation.
Stop
to exit.
45
Start
to transmit
Need help?
Do you have a question about the 1170 and is the answer not in the manual?
Questions and answers