Uart Interfaces; Gpio Interfaces; Table 10: S/Pdif Header J23.Pinout; Table 11: Pin Headers J30 (Com1/Ser0) And J29 (Com2/Ser1) Pinouts - Kontron COMe Ref. Carrier-I T6 TMIP User Manual

The following table provides pinout information for the S/PDIF header, J23.

Table 10: S/PDIF header J23.Pinout

S/PDIF Header (J23)

2.3.8. UART Interfaces

The COMe Ref. Carrier-i T6 TMIP provides two RS232 COM ports (RX/TX only) via the pin headers J30
(COM1/SER0) and J29 (COM2/SER1).
The following table provides pinout information for the pin headers J30 (COM1/SER0) and J29 (COM2/SER1).

Table 11: Pin Headers J30 (COM1/SER0) and J29 (COM2/SER1) Pinouts

COM/SER Pin Headers ( J30) & ( J29)

2.3.9. GPIO Interfaces

The COMe Ref. Carrier-i T6 TMIP provides four GPIs and four GPOs via a 10-pin GPIO pin header, J32.
The following table provides pinout information for the GPIO pin header J32.

Table 12: GPIO Pin Header J32 Pinout

GPIO Pin Header (J32)
www.kontron.com
Pin Signal
1 SPDIF_OUT
2 GND
3 SPDIF_IN
4 GND
Pin Signal (J30)
3 GND
2 SER0_RX
1
SER0_TX
Pin Signal
10 GND
9 GPO3
8 GPO2
7 GPO1
6
GPO0
5
GPI3
4 GPI2
3 GPI1
2 GPI0
1 VCC 3.3V
COMe Ref. Carrier-i T6 TMI - User Guide Rev. 1.4
Signal (J29)
GND
SER1_RX
SER1_TX
// 27