Table of Contents
Advertisement
8.
Click the Enable ProView Features radio button and click Apply to configure the
device.
The ProView function is enabled and the switch can be configured.
3.3 Installing the Configuration Utility
Note!
Microsoft .NET Framework version 2.0 or greater is required for this
application.
1.
Insert the Advantech EKI Device Configuration Utility CD-ROM into the CD-
ROM drive (whereas E:\ is the drive name of your CD-ROM) on the host PC.
2.
Use Windows explorer or the Windows Run command to execute the setup pro-
gram, the path for the setup program on the CD-ROM is as follows:
3.
If there is an existing COM port mapping utility on the host PC, remove it at this
time. A system reboot may be necessary before continuing the installation.
EKI-5729PI & EKI-5624PI User Manual
Figure 3.1 Enabling ProView Features
E:\EKI_Device_Configuration_Utility_v2.01.exe
23
Advertisement
Table of Contents
