TDR-X Operator's Manual
CV JOINT INPUT SHAFT
Progressive has equipped the TDR-X with an input
shaft that contains a CV joint. This design allows
the TDR-X to be more agile and maneuverable,
while minimizing drive line vibration.
Never allow the CV Joint to exceed an angle of
more than 80 degrees or damage will result. See
Figure 7.
Damage can occur more easily when turning
as you reverse the tractor
DISCONNECTING THE MOWER
The mower can be stored with the decks in the raised or lowered
position. If the wings or decks are in the raised position, ensure the deck
locks are securely engaged before disconnecting the mower from the
tractor.
1) Place mower on a level surface for storage.
2) Ensure that the tractor engine is shut off and the parking brake is
engaged.
3) Inspect deck safety locks to ensure they are properly engaged (if
in the raised position). (Figure 8)
24
Figure 7
Figure 8