Progressive Turf Equipment TDR-X Operator's Manual & Parts List page 35

DRIVELINE GREASING
All PTO shafts on the TDR-X mower feature 100h greasing intervals.
The following decal is located on the mower as a reminder.
Failure to properly lubricate the telescoping shaft sections will lead to
binding of the shaft and damage to the mower or tractor driveline.
INPUT SHAFT – 100h / Monthly (10 Locations)
Shaft must be disconnected from tractor and collapsed fully for greasing
C.V. CENTER HOUSING
INPUT SPLINE
CROSS & BEARINGS
* Inner & outer guards must be rotated to align holes for accessing the two telescoping shaft grease fittings.
INTERMEDIATE SHAFT – 100h / Monthly (3 Locations)
DECK SHAFTS – 100h / Monthly (7 Locations - 3 Shafts)
CROSS & BEARINGS
SPLINE
C.V. BALL & SOCKET
TELESCOPING SHAFT*
GUARD BUSHINGS
CROSS & BEARINGS
GUARD BUSHINGS
GUARD BUSHINGS
TELESCOPING SHAFT*
TDR-X Operator's Manual
CROSS & BEARINGS
CROSS & BEARINGS
SLIP YOKE SPLINES
SPLINE
33