Maintenance - Progressive Turf Equipment TDR-X Operator's Manual & Parts List

MAINTENANCE

Ensure the tractor controls are in the park position, the engine is
turned off, the parking brake is engaged and hydraulic pressure
has been relieved before performing service or maintenance.
Perform all maintenance with the wings and mower decks in the
lowered position and the machine on a flat and level surface.
Always use personal protection devices such as protective
glasses and face shields, protective shoes, gloves, hard hats, and
ear protection when performing service or maintenance
functions.
When completing a maintenance or service function, make sure
all safety shields are installed before placing mower in service.
Service
Intermediate Hanger Bearing
Locks, Lock Release, Lock Cams
Deck Pivots, Deck Swivels, Wings
HEX Roller End Bearing
Transport Wheels
Input PTO Shaft (10 locn's)
Intermediate PTO Shaft (3 locn's)
Deck PTO Shaft ( 7 locn's)
Inspect Gearbox - All
Check Gearbox Oil - All
Change Gearbox Oil - All
Figure 13
Notes:
1) Always grease the PTO safety shield collars when greasing the shaft
Maintenance Intervals
Initial Run Weekly or
Daily
/ 50h
- -
- -
- -
- -
- -
- -
- -
- -
- X
- -
X -
TDR-X Operator's Manual
100h / 600h /
50h Monthly Yearly
X -
- -
- -
X -
- X
- X
- X
- X
- -
- X
- -
Removal
from
Storage
- X
- X
- X
- X
- X
- X
- X
- X
- X
- X
X -
31