Pyrolytic Cycle; Child Safety; Adjusting The Display Contrast - ROSIERES FE GD21 RB User Instructions

PYROLYTIC CYCLE

The oven is equipped with a pyrolyser cleaning system, which
destroys food residues at high temperature. The operation is carried
out automatically by means of the programmer. The resulting fumes
are rendered "clean" by passing over a Pyrolyser wich starts as
soon as cooking begins. As very high temperatures are required
by the Pyrolyser, the oven door is fitted with a safety lock.
The pyrolyser can be stopped at any time. The door cannot be
opened until the safety lock is displayed.
NOTA : if a hob has been fitted above the oven, never use the gas
burners or the electric hot-plates while the Pyrolyser is working,
this will prevent the hob from overheating.
TWO PYROLYTIC CYCLE are pre-set.
. ECO PYROCLEAN : cleans a moderately stained oven. Operates
for a period of 90 minutes.
. SUPER PYROCLEAN : cleans an heavily stained oven. Operates
for a period of 120 minutes.
Never use commercially available cleaning products on a Pyrolytic
oven !
Tip : carrying out Pyrolytic cleaning immediately after cooking
allows you to take advantage of residual heat, thus saving energy.
Before carrying out a Pyrolytic cycle :
- Remove all accessories from the oven : they cannot withstand
the high temperatures and would be damaged by pyrolytic
temperatures.
- Remove any large spillages or stains as it would take too long
to destroy them. Also excessively large amounts of grease could
ignite when subject to the very high temperatures of the Pyrolytic-
cycle.
- Close the oven door.
Using the pyrolytic cycle :
1- Turn the function selector knob to "Pyrolytic Mode". The symbol
"P" (Type A) or "PYRO" (Type B) will appear.
ECO mode flashes.
Remember : ECO - cycle of 90 minutes - moderately stained oven
SUP - cycle of 120 minutes - heavily stained oven
2- By using the central button select the required Pyrolytic mode,
according the degree of staining : ECO or SUP.
• On the timer Type A, confirm the choice by pressing the
central button..... the oven starts the pyrolytic cycle.
On the display, the time of the day and the "time" and "stop"
indicator lights will appear.
• On the timer Type B, your choice is confirmed after 3 seconds...
the oven starts the pyrolytic cycle. the pyrolytic mode selected
flashes and the "time" and "stop" indicator lights will appear.
During the pyrolytic cycle, the locking oven door appears, it indicates
that the door is locked. The cooling fan will operate.
The indicator light flashes until the temperature required is not
reached and then it becomes fixed.
* The start of the pyrolytic cycle can be delayed by selecting an
end of time. Turn the programmation control knob to the end of
time and set the end of time required.
At the end of the pyrolytic cycle the oven will automatically
switch off.
For 15 seconds, an audible signal lets you know that the cycle has
ended and the "time" and "Stop" indicator lights will flash.
. Turn the function knob to stop. Unless you do this, the symbols
will continue flashing. The symbol "P" or "Pyro" disappears and
also on the Timer B, the pyrolytic mode.
The oven door will remain locked until the temperature is high. So,
as the locking oven door is light, the oven can not be opened.
The cooling fan does not switch itself off until the temperature of
the oven components is reasonable.
At the end of the cycle, the indicator flashes again, it will remain
also turned on after having extinguished the oven and it will
estinguish when the inside temperature of the oven is sufficiently
low.
Pyrolysis leaves a white residue on the oven walls. Wait for the
oven to cool completely then clean the inside of the oven with a
damp sponge to wipe off the residue.

CHILD SAFETY

This function is essential, especially when children are around. It
prevents children from switching the oven on or altering the pre-
set programmes.
This safety system locks the oven control panel while it is operating.
There are two levels of safety :
LIVEL 1 : Locking selector control knob and the central button.
. To activate : turn the programmation control knob to child safety.
. Action : the control knobs are inactive*.
. To deactivate : turn the programmation control knob to 0.
LIVEL 2 : Locking function selector knobs
. To activate : turn the function selector knob to child safety and
keep the central button pressed in for 3 seconds.
. Action : all the controls are inactive*.
. To dactivate : the same procedure as for activating. Turn the
function selector knob to child safety and keep the central button
pressed in for 3 seconds.
*Nota : in all cases, for reasons of safety, even when the controls
are locked, the oven can be switched off by turning the selector
knob to 0.

ADJUSTING THE DISPLAY CONTRAST

The display contrast can be adjusted at any time.
The default setting is "C5". To adjust the setting, carry out the
following:
• Turn the programme selector to "Light" and the function
selector to "0". Press in the central key for 3 seconds and
"CX" will appear on the display (where X = the contrast level).
Turn the central key to adjust the contrast setting: the settings
go from 1 to 9. Confirm the new setting by pressing the central
key for 3 seconds.
18 GB