Chapter 4: Connecting And Using The Intel Compute Card - SMART Board MX Series User Manual

Chapter 4
Connecting and using the Intel
Compute Card
With the SBID-MX365, SBID-MX375, and SBID-MX386 models, you can insert an Intel Compute Card in the
compute card's slot on the AM50 iQ appliance and then view the Intel Compute Card's Windows 10
operating system on the display.
CAUTION
Install the AM50 iQ appliance and Intel Compute Card before turning on the display for the first time.
IMPORTANT
If you're installing an AM50 iQ appliance in a display, make sure the display's firmware is updated to 1.8.7
or later. The display may not function properly if the display's firmware is not updated. See the
SMART Board MX series interactive displays installation and maintenance guide
(smarttech.com/kb/171257).
TIP
If the Intel Compute Card meets the minimum requirements for SMART software, you can install the
SMART software included with the display on the Intel Compute Card. For more information about
installing software, see Chapter 5: Connecting and using computers on page 27.
To switch to the Intel Compute Card
1. Press Input on the front control panel.
The Input selection menu appears.
NOTE
Inputs with devices connected are blue, and inputs without a connection are black.
2. Tap Compute Card.
smarttech.com/kb/171284 26