Wiring The Power Outputs - Planet IPOE-171S User Manual

5.3 Wiring the Power Outputs

Please follow the steps below to insert the power wires.
Step 1: Please find one terminal block connector within two
DC power outputs shown below:
DC Output 2
The wire gauge for the terminal block should be in
the range of 12 ~ 24 AWG.
Note
Step 2: Insert
V– / V+ terminal; terminals 1 and 3 for Power 1;
terminals 2 and 4 for Power 2.
the Negative/Positive
DC Output 1
DC wires into the
13