Hardware Installation; Before Installation - Planet IPOE-171S User Manual

5. Hardware Installation

5.1 Before Installation

If there is no power socket in your network environment,
the IPOE-171S provides DC power for this Ethernet Device
conveniently and easily. The IPOE-171S will separate the power
and data out. It provides two kinds of DC power output through
its DIP switch and its voltage and current shown below:
 Please check the power requirements of the
device carefully, that is going to get the power
from IPOE-171S.
 If the power requirement is higher than the
IPOE-171S can supply, current overload might
shut down the IPOE-171S itself. Thus, it will
also shut down your device as well.
 Please ensure the output voltage is correct for
remote device. Otherwise, it will damage your
remote device.
Power Output
V
V
V+
V+
12V
DC Voltage
12V 24V
Figure 3: DIP Switch of IPOE-171S
24V
11