Answer A Call From A Different Source On The Multibase, On Page - Cisco Headset 500 Series User Manual

End an Active Call and Answer an Incoming Call
End an Active Call and Answer an Incoming Call
Procedure
Step 1
Hold Call
Step 2 Press Call
Answer a Call From a Different Source on the Multibase
When you have an incoming call, you hear the ringtone in your headset even if the call is on a source you
haven't selected.
If you don't already have an active call, the multibase automatically changes sources to the incoming call
source.
Procedure
Do one of these actions:
• Press Call
• On the multibase, press the source button for the incoming call.
Cisco Headset 500 Series User Guide
26
until you hear a tone.
once.
on your headset.
Note Active calls don't automatically go on hold when you change sources on the multibase. Make
sure you place on hold or end any active calls before you switch sources. Active calls do
automatically hold when you pressCall
Cisco Headset 500 Series Call Controls
on your headset.