Pair A Guest Headset - Cisco Headset 500 Series User Manual

Pair a Guest Headset

Guest headsets use their own tuning settings while in conferencing mode. Users can mute and adjust the
volume in their headsets without changing the settings on any other paired headsets.

Pair a Guest Headset

You can pair up to three guest headsets to a base. Guest headsets retain any tuning or volume settings. Guest
headsets are muted by default when they pair. The primary headset plays a tone indication when a guest
headset is trying to pair. The primary headset must confirm the guest headset within 10 seconds. A second
tone plays when the primary headset accepts the guest for conferencing. The guest headset's original base
LED's flash white to show that there is no paired headset.
Note When the guest headset tries to pair, the primary headset can't accept any incoming calls until it accepts or
rejects the guest headset to the base.
Before you begin
The primary headset must be already paired with the base.
Procedure
Step 1 Place the guest headset on the base.
Step 2 Press Call
Cisco Headset 500 Series User Guide
14
on the primary headset to enable the guest headset to join.
Your Headset