Cisco Headset 500 Series User Manual page 38

Adjust Your Bass and Treble (USB only)
Adjust Your Bass and Treble (USB only)
You can adjust how much bass or treble your hear through your headset when you use a USB connection.
Procedure
Step 1 Press Applications
Step 2
Select Status > Accessories.
Step 3 Highlight Cisco Headset and press Setup.
Step 4
Select Speaker > Tuning.
Step 5 Press the Navigation cluster, left or right, to adjust the tuning.
Step 6
Press Save to apply and retain your setting.
Adjust Your Speaker Feedback (USB Only)
You can adjust how much of your own voice you want to hear through your headset speaker when you use a
USB connection.
Procedure
Step 1
Press Applications
Step 2 Select Status > Accessories.
Step 3
Highlight Cisco Headset and press Setup.
Step 4 Select Speaker > Sidetone.
Step 5
Press the Navigation cluster, up or down, to adjust the sidetone.
Step 6 Press Save to apply your setting.
Adjust Your Microphone Volume (USB Only)
You can adjust how loud you sound through your headset microphone when you use a USB connection. You
may wish to adjust this setting depending your surrounding ambient noise level.
Procedure
Step 1 Press Applications
Step 2
Select Status > Accessories.
Step 3 Highlight Cisco Headset and press Setup.
Step 4
Select Microphone > Gain.
Cisco Headset 500 Series User Guide
30
.
.
.
Headset Settings