Connect And Use The Cisco Headset 530 Series Y Trainer Cable; Cisco Headset 560 Series - Cisco Headset 500 Series User Manual

Connect and Use the Cisco Headset 530 Series Y Trainer Cable

Connect and Use the Cisco Headset 530 Series Y Trainer Cable
You can connect a second headset to the Cisco Headset 530 Series with the Y Trainer Cable. The Y Trainer
Cable enables a trainer to listen in to a trainee's call and join if necessary. The switch on the trainer cable
alternates voice control between the headsets so that a trainer or supervisor can quickly join a call if necessary.
The color on each arm of the cable corresponds to the colors on the switch. When the switch shows blue, the
blue-banded arm of the headset is active. When the switch shows light grey, the light grey arm of the cable
is active.
Procedure
Step 1 Connect the trainer cable to the Cisco Headset 530 Series USB controller.
Step 2
Connect the trainee headset to the arm of the trainer cable without the control switch.
Step 3 Connect the trainer headset to the arm of the Y cable with the switch.
Step 4
Use the switch on the trainer cable to alternate voice feedback between the headsets.

Cisco Headset 560 Series

The Cisco Headset 560 Series includes two wireless headset models designed for use in a modern office space.
The Cisco Headset 561 features a single earpiece for lightweight comfort and support. The Cisco Headset
562 offers dual ear cups for rich sound and comfort in a noisy office space. To use this series, you need either
the standard base or the multibase. The bases plug into the call device and facilitate communication with the
headset.
Each headset base has a default range of approximately 145 feet (45 meters) unless there are physical barriers
such as walls and doors or outside interference from other DECT radio sources. Your administrator can
increase your headset range up to approximately 330 feet (100 meters). A headset will unpair from its base
if it's taken too far away. The base light turns solid white when it's paired to the headset, and flashes when it
isn't.
Cisco Headset 500 Series User Guide
4
Your Headset