Connect The Multibase To A Bluetooth Device; Turn Bluetooth On And Off With The Multibase - Cisco Headset 500 Series User Manual

Your Headset
Base Icon
Related Topics

Connect the Multibase to a Bluetooth Device

The Cisco Headset 560 Series Multibase can connect to Bluetooth devices such as a mobile phone or tablet.
The headset base appears on your call device as Cisco Headset followed by the last three digits on your
headset serial number.
Note
You can find your headset serial number in the lower right corner on the underside of your base.
The multibase can store up to four different paired Bluetooth devices. If you already have four paired devices,
the base will replace the device which has not been used in the longest time.
Procedure
Step 1
Press the Bluetooth button on the back of the multibase twice to start pairing.
Step 2 Select your headset from the Settings menu on your device.
The Bluetooth LED lights white when pairing is successful.

Turn Bluetooth On and Off with the Multibase

Your multibase remembers the last-connected device. When you turn Bluetooth off on the multibase, the
connection to the device stops. When you turn Bluetooth on again, the base reconnects to the device.
Procedure
Press the Bluetooth button on the back of the base once to turn it on or off.
Connect the Multibase to a Bluetooth
Connection
The mobile phone icon corresponds with the Bluetooth connection found
at the back of the base. While the icon is of a mobile phone, the base
will connect with any compatible Bluetooth call device.
The multibase can save and remember up to four Bluetooth call devices.
If you are listening to music through the Bluetooth source, the music
pauses when you place the headset on the base.
Device, on page 11
Cisco Headset 500 Series User Guide

Connect the Multibase to a Bluetooth Device

11