Components - Siemens SIMATIC ET 200SP System Manual

System overview

2.2 Components

2.2 Components
Basic components of the SIMATIC ET 200SP motor starters
Table 2- 1 Basic components of SIMATIC ET 200SP motor starters
Basic component
7 mm/15 mm mounting rail
according to EN 60715
Motor starter
16
Function
The mounting rail is the module carrier of the
ET 200SP system. You install the ET 200SP
system on the mounting rail.
The motor starter is a switching and protection
device for 1-phase and 3-phase loads.
The motor starter is available as a direct-on-line
and reversing starter.
System Manual, 04/2016, A5E35582704002A/RS-AA/001
Figure
Motor starter