Table 3-3: Components Required For Setting Up With The Motor Plugged In - Siemens ecofast 3RK1702-2GB18-0AA1 Manual

3.2 Setup with motor plugged in
3.2.1 Required components
The table below shows which components are required:
Item Order data
1 Motor starter
2 Mounting plate with screws for motor starter
3 Power T clamping connector, optional
5 x 4 mm2
5 x 6 mm2
4 Power cable
5 AS-i cable, trapezoidal-section yellow,
rubber 2 x 1.5 mm
6 AS-i cable, trapezoidal-section black,
rubber 2 x 1.5 mm
AUX PWR
7 Cable end covers for sealing open
cable ends (1 set = 10 covers)

Table 3-3: Components required for setting up with the motor plugged in

ECOFAST Motor Starters
GWA 4NEB 950 5221-12 DS 02
2
for fieldbus
2
for ext. 24 V auxiliary voltage
Installation of Motor Starters
Order number
3RK13..
depending on version
3RK1911-3AA00
3RK1911-2BF01
3RK1911-2BF02
3RK1911-0A.. depending
on the length and cross-
section
3RX901.-0AA00
depending on length
3RX902.-0AA00
depending on length
3RK1901-1MN00
3-3