Mounting The Mechanical Bracket For The Baseunit - Siemens SIMATIC ET 200SP System Manual

Mounting

4.4 Mounting the mechanical bracket for the BaseUnit

4.4 Mounting the mechanical bracket for the BaseUnit
Introduction
You can use the mechanical bracket on 7 mm and 15 mm mounting rails.
You must use the mechanical bracket in the following situations:
● When using a 15 mm mounting rail
● With a vertical mounting position
● For applications according to shipbuilding standards in all mounting positions with 7.5 mm
and 15 mm mounting rails
You can find further information on the mechanical bracket in chapter "Application planning
(Page 25)".
42
System Manual, 04/2016, A5E35582704002A/RS-AA/001
Motor starter