Preface - Siemens SIMATIC ET 200SP System Manual

Preface

Purpose of the documentation
The present manual supplements the System Manual ET 200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293).
Functions affecting the system in general are described in this System Manual.
The information provided in this manual, the system manual and the function manuals
enables you to commission the ET 200SP distributed I/O system.
Basic knowledge required
A general knowledge of the following areas is needed in order to understand this manual:
● Industrial controls
● Digital circuit logic
● Automation technology
● Safety technology
Definition
In this manual, "SIMATIC ET 200SP motor starter" is used as a synonym for all variants of
the SIMATIC ET 200SP motor starter.
Safety instructions
Hazardous Voltage
Can Cause Death, Serious Injury, or Property Damage.
Proper use of hardware products
This equipment is only allowed to be used for the applications described in the catalog and
in the technical description, and only in conjunction with non-Siemens equipment and
components recommended by Siemens.
Correct transport, storage, installation and assembly, as well as careful operation and
maintenance, are required to ensure that the product operates safely and without faults.
EU note: Start-up/commissioning is absolutely prohibited until it has been ensured that the
machine in which the component described here is to be installed fulfills the
regulations/specifications of Machinery Directive 2006/42/EC.
Motor starter
System Manual, 04/2016, A5E35582704002A/RS-AA/001
WARNING
5