Adjustable Stand With Pivot Capability - NEC MultiSync E243F User Manual

5. Please check that you can still raise and lower the monitor screen after you have installed the cables (Figure 5 and Figure 6).
Power Cord
Figure 5
6. Connect the power cord to a power outlet.


OOTEN: •
Please refer to the Caution section of this manual for proper selection of the AC power cord (see
•

Please make sure that enough power is supplied to the monitor. Please refer to
"Chapter 4 Specifications" on page
7. Turn on the monitor by pressing the


OOTEN: If you have any problems please refer to the Troubleshooting section of this User's Manual (see

Adjustable Stand with Pivot Capability

Hold the monitor on each side and adjust height, tilt and swivel as desired.
For screen rotation (pivot), hold the monitor on each side, lift to its maximum height and turn it from landscape to portrait.
Rotation, Raise and Lower


CAUTIOON: Please refer to
USB Cable
DisplayPort Cable
27.
button and then turn on the computer.
Tilt and Swivel
"CAUTION 5".
English−17
USB Cable
Figure 6
"Power Supply"
CAUTIOON:
Power Cord
DisplayPort Cable
page 7).
in the
page 23).