Adjustable Stand With Pivot Capability - NEC MultiSync E273F User Manual

5. Please check that you can still raise and lower the monitor screen after you have installed the cables (Figure 5 and Figure 6).
Power Cord
6. Connect the power cord to a power outlet.
OOTEN •
Please refer to the Caution section of this manual for proper selection of the AC power cord (see


•
Please make sure that enough power is supplied to the monitor. Please refer to
"Chapter 4 Specifications" on page
7. Turn on the monitor by pressing the
OOTEN
If you have any problems please refer to the Troubleshooting section of this User's Manual (see

Adjustable Stand with Pivot Capability

Hold the monitor on each side and adjust height, tilt and swivel as desired.
For screen rotation (pivot), hold the monitor on each side, lift to its maximum height and turn it from landscape to portrait.
Rotation, Raise and Lower
CAUTIOON: Please refer to


USB Cable
DisplayPort Cable
Figure 5
29.
button and then turn on the computer.
Tilt and Swivel
"CAUTION 5".
English−19
USB Cable
DisplayPort Cable
Figure 6
"Power Supply"
CAUTIOON
Power Cord
page 9).
in the
page 25).