Adjustable Stand With Pivot Capability - NEC MultiSync EA242F User Manual

7. Turn on the monitor by pressing the
8. When using analog (VNA) input, No Touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial
setup. For further adjustments, use the following OSD controls:
• [AUTO CONTRAST]
• [AUTO ADJUST]
Refer to the "OSD Controls List"


NOTE:
If you have any problems please refer to the Troubleshooting section of this User's Manual (see

Adjustable Stand with Pivot Capability

Hold the monitor on each side and adjust the screen position as desired.
For screen rotation (pivot), hold the monitor on each side, lift to its maximum height and turn it from landscape to portrait.
Rotation, Raise and Lower


CAUTION:
Please refer to
key and then turn on the computer (Figure 7).
section of this User's Manual for a full description of these OSD controls.
Figure 7
Tilt and Swivel
"CAUTION 5".
English−19
page 28).
Power key
CAUTION: