Index Important Information ........................English-1 Registration Information .......................English-3 Recommended Use ........................English-4 Parts Name and Functions ......................English-9 Quick Start ............................English-10 Controls ............................English-15 Specifications ..........................English-19 Features ............................English-21 Troubleshooting ..........................English-22 Manufacturer’s Recycling and Energy Information ...............English-23...
Please use the power cord provided with this display in accordance with the power cord table. If a power cord is not supplied with this equipment, please contact NEC. For all other cases, please use the power cord with the plug style that matches the power socket where the monitor is located.
(4) The image shown in this user’s manual is indicative only. If there is inconsistency between the image and the actual product, the actual product shall govern. (5) Notwithstanding articles (3) and (4), NEC will not be responsible for any claims on loss of profit or other matters deemed to result from using this device.
WARIGE: The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regulation could void your right to operate this equipment.
Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOINN HEN SETTINN UP AND USINN THE LCD COLOR MONITOR: About the Symbols To ensure safe and proper use of the product, this manual uses a number of symbols to prevent injury to you and others as well as damage to property.
WARNING Do not place this product on a sloping or unstable cart, stand or table, as the monitor may fall, causing serious damage to the monitor. Do not use the monitor if the monitor was dropped or the cabinet is damaged. Do not insert objects of any kind into the cabinet slots, as they may touch dangerous voltage points, which can be harmful or fatal, or may cause electric shock, fire or equipment failure.
CAUTION Do not climb on the monitor or the table where the monitor is installed. Do not install the monitor on a wheeled table if the wheels on the table have not been properly locked. The monitor may fall causing damage to the monitor or personal injury.
NOEE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever the screen is idle, or turn off the monitor when not in use.
Ergonomics CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER, AND NECK FATINUE. CHECK THE FOLLOINN HEN YOU POSITION THE MONITOR: To realize the maximum ergonomics benefits, we recommend the following: • For optimum performance of the monitor, allow 20 minutes for warming up. Avoid reproduction of still patterns on the monitor for long periods of time to avoid image persistence (after image effects).
Parts ame and Functions Control Panel Power Key Control Keys Refer to the Controls section. See page Oerminal Panel AC I Connector USB Downstream Port (Oype-A) Connects with the supplied power cord. Connects with USB devices. Connects with external equipment such as a computer DisplayPort I compliant with USB.
Quick Start For box contents, please refer the printed contents sheet provided in the box. To attach the base to the monitor stand: 1. Place monitor face down on a non-abrasive surface (Figure 1). 2. Please rotate the monitor stand 90 degrees as shown in Figure 1. CAUOINE: Handle with care when pulling the monitor stand.
3. Place hands on each side of the monitor screen, tilt the screen to the maximum tilt angle, then lift the screen to the highest position. 4. Connect all cables to the appropriate connectors (Figure C.1). hen using the USB cable, connect the Type-B connector to the USB upstream port on the rear side of the monitor and the Type-A connector to the downstream port on the computer (Figure C.1a).
8. Turn on the monitor by touching the key and then the computer (Figure E.1). 9. hen using analog (VNA) input, No Touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup. For further adjustments, use the following OSD controls: •...
Flexible Arm Installation This LCD monitor is designed for use with a flexible arm. Contact NEC for more information. To prepare the monitor for alternate mounting purposes: • Follow the instructions provided by the manufacturer of the display mount. CAUOINE: To meet the safety requirements, the monitor must be mounted to an arm that supports the weight of the monitor.
Re-attaching the original monitor stand Reverse the process in the previous section to re-attach the monitor stand. NOEE: Match “TOP SIDE” mark on the monitor stand to top side of the monitor when re-attaching the monitor stand. “TOP SIDE” mark Please match top side of the monitor English-14...
Controls NSD (Nn-Screen Display) Control Functions 1. Basic functions of the touch keys on the front of the monitor – SELECO IPUO/RESEO NSD Menu ot displaying on screen Shortcut to Shortcut to [VOLUME]. Displays OSD. Selects input signal. [BRINHTNESS]. Displaying on screen Moves leftward.
VNLUME Controls the volume of the speakers or headphones. To mute the speaker output select Audio icon and touch INPUT/RESET key. BRIGHOESS Adjusts the overall image and background screen brightness. Touch INPUT/RESET key to enter [ECO MODE]. ECN MNDE NFFE: Sets brightness variable from 0% to 100%. ECN MNDE1E: Sets brightness 70%.
FACONRY PRESEO Selecting [FACTORY PRESET] allows you to reset all OSD control settings back to the factory settings except [MUTE], [CARBON SAVINNS], [CARBON USANE], and [SINNAL INFORMATION]. Individual settings can be reset by highlighting the control to be reset and touching the INPUT/RESET key. EXIO Selecting [EXIT] allows you to exit OSD menu/sub menu.
NSD ONNL LAGUAGE Selects the language used by the OSD. NSD OUR NFF The OSD menu will stay on as long as it is in use. You can select how long the monitor waits after the last key touch to shut off the OSD menu.
oteE: The manufacturing and operating carbon footprints are calculated by a unique algorithm developed exclusively by NEC for its monitors and are accurate at the time of printing. NEC reserves the right to publish updated carbon footprint values. * Depending on the country where the LCD monitor is shipped to, the VESA Plate is not included in the box contents.
NOEE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.
Manufacturer’s Recycling and Energy Information NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment. e are engaged in developing environmentally- friendly products, and always strive to help define and comply with the latest independent standards from agencies such as ISO (International Organisation for Standardization) and TCO (Swedish Trades Union).