Promise Technology Vess R3600 Series Product Manual page 194

Promise Technology
Table of Supported Commands (Continued)
Command Action
encldiag View enclosure element information.
enclosure
event View or clear events logs.
export Subsystems only. Export files to remote TFTP host.
factorydefaults Restore settings to factory defaults.
fc View or edit fc information and settings. Fibre Channel host interface product only.
folder List, add, modify, delete and refresh folder.
group
import Import files or license from remote TFTP host.
initiator View initiator list, add or delete initiator entry.
iscsi View or edit iSCSI information and settings. iSCSI host interface product only.
isns View or edit iSNS information and settings. iSCSI host interface product only.
license View license information.
logout Logout session for the current user.
lunmap
maintenance Enter or exit maintenance mode.
migrate Start or stop volume migration
mp
nasconfig List, reset or restore NAS configuration
nasshare NAS share settings
net View or edit ethernet network information and settings.
ntp View or edit NTP status and settings
pair List, add, modify and delete pair.
password Modify a user's password
Note: Commands are NOT case sensitive.
View or edit enclosure and SEP information and settings. Locate an enclosure via
LEDs.
List, add, modify or delete nas group.
View the LUN mapping and masking table. Enable or disable LUN mapping and
masking on iSCSI and Fibre Channel host interface product.
Add, delete or modify a LUN mapping and masking entry.
View media patrol status and progress.
Start, stop a media patrol process.
Vess R3600 / Vess J3600 Product Manual
174