Promise Technology Vess R3600 Series Product Manual page 167

Promise Technology
Making SSH Settings
To change SSH service settings:
1. Click the Administration tab.
2. Click the Service icon.
3. Click the gear icon for SSH service and select the Settings option.
4. In the SSH Settings tab, make settings changes as required:
• Choose a startup type,
* Automatic – (default) Starts and runs with the subsystem.
* Manual – You start the service when you need it.
• Port number - Default is 22.
• Max Number of Concurrent Connections – Default is 4.
Maximum number is 4.
• Session Time Out - Default is 24 minutes.
5. Click the Save button.
6. Type "CONFIRM" in the popup menu and click the Confirm button.
SSH Public Key Management
To change SSH service settings:
1. Click the Administration tab.
2. Click the Service icon.
3. Click the gear icon for SSH service and select the SSH Public Key Management option.
4. In the SSH Public Key Management menu, make settings changes as required:
Click the Choose File button and locate the file with the SSH Public Key
•
• Enter a comment
• Enter TFTP IP and file path information
5. Click the Upload button.
147
Management with WebPAM PROe