Table of Contents
Advertisement
USER MANUAL
1. Safety
Follow precautions and all the safety requirements described on this user
manual to prevent any damages and failure of equipment.
1-1. Caution: Installation
1. The device must be kept in a dry and well-ventilated room.
2. According to IEC61010-2-020 maintain a 30cm "clearance envelope" around the device
while the rotor is spinning.
3. Do not operate the device in areas where work is completed with explosice substances
4. Connect the device to voltage sources which correspond to the electrical requirements
on the label attached to the device.
5. Do not install the device at a place with high voltage regulation.
(Allowable voltage regulation limits : ± 10 %)
6. Use sockets with a protective earth conductor and suitable power cord.
4
A/S Inquiry : +82-2-3452-8966 / techsupport@ihanil.com
MINI CENTRIFUGE
Advertisement
Table of Contents
