Installation - Panasonic Aquarea B1 Planning And Installation Manual

6

Installation

The correct assembly of the devices as well as their hydraulic and electrical installation are
described in this chapter.
It is meant for qualified installers and electrical professionals. It is not meant for lay persons.
Electrical and water installation work must be carried out by the corresponding professionals. A
defective installation due to not paying any or scant attention to the instructions in this chapter
can lead to injuries or damage.
As installer, pay attention to the following instructions:
1. Ensure that you have read and understood the installation and safety notices before you
begin work.
2. Keep this installation manual safely together with the device after assembly.
3. After installation, perform a test run to ensure that no malfunctioning occurs.
4. Subsequently, explain the operation, maintenance and servicing of the devices to the
user according to the operating instructions. Also point out to the user that he should keep
the operating instructions in a safe place.
5. If you have questions or doubts relating to the installation, contact a professional installer
or the dealer.
i
Note
The figures of the following installation instructions predominantly feature models of the H gen-
eration. The instructions are, however, also valid for F and G generation models.
Detailed installation instructions for the F and G generation models are given in the planning
manual for split systems or compact systems from 2014 as well as in the installation instructions
and in the service manual of the respective device.
Aquarea air-to-water heat pumps - Planning and installation manual - 01/2018
Installation
137