Panasonic Aquarea B1 Planning And Installation Manual page 114

Appendix
Menus
For installers
Menu
7 Installer setup Service settings
7.1
Max. pump speed
Setting the maximum pump
speed.
7.2
Pumping out
Switching on the pumping-out
operating mode
218
Aquarea air-to-water heat pumps - Planning and installation manual - 01/2018
Standard setting Setting options /Display
Sterilisation
Sterilisation can be set for 1 or several days of
the week.
Su / Mo / Tu / We / Th / Fr / Sa
Sterilisation: Time
Time sterilisation of the domestic hot water tank
is to commence on the day of the week set.
0:00 to 23:59
Sterilisation: Sterilisation temp.
Water temperature for
65 °C sterilising the domestic
hot water tank.
Sterilisation: Duration (max.)
Duration of sterilisation
0:10
(in hours and minutes)
Setting of volume flow, max. value und
switching on / off of the pump.
Vol. flow XX:X l/min
Max. value: 0x40 to 0xFE,
Pump: ON/OFF/vent
Pumping-out operating mode
ON
Menu
Installer set-up Service settings
7.3
Screed drying
Settings for the drying of
screed and walls during the
construction phase.
This function should only be
used during the construction
phase and should not be used
for any other purposes.
7.4
Service contract
Entering name and telephone
number of Customer Service
Aquarea air-to-water heat pumps - Planning and installation manual - 01/2018
Standard setting Setting options /Display
Setting and switching on of the screed drying
function.
ON / processing
Processing
Entering the steps (1
Steps: 1 to 99) as well as the
Temperature: 25 °C temperatures for screed
drying
ON
Display of the screed drying stage, the set
temperature and the current temperature
Name and telephone number of
Customer Service
Contact 1 / Contact 2
Contact 1 / Contact 2
Name and telephone number of the contact
Name / telephone symbol
Entering name and telephone number.
Contact name: Letters A to Z or a to z
Contact number: 1 to 9
Appendix
219