Outdoor Units And Compact Devices - Panasonic Aquarea B1 Planning And Installation Manual

Installation
Opening and reclosing the connection box
Carry out the following steps to open the cover of the connection box for the hydro-module of
the H Generation:
1. Remove the front plate as described earlier.
2. Remove the six attachment screws (2) on the cover of the connection box (1).
3. Swing the cover to the right (3).
4. To close the cover of the connection box, proceed in the reverse order.
Hydro-module H-Generation
1
2
2
150
Aquarea air-to-water heat pumps - Planning and installation manual - 01/2018
3

6.5.3 Outdoor units and compact devices

Removing and replacing the front plate
Carry out the following steps to remove the front plate i.e. the cover of the connection box on
the front side of the outdoor unit or compact device:
1. Remove the attachment screws (1) on the front plate (2).
2. Push the front plate downwards (3), to release the latches.
3. Then pull the front plate to yourself to remove it.
4. To replace the front plate, proceed in the reverse order.
Outdoor units
1
3
1
An outdoor unit for the B3* and B6* models is shows
as an example. For other outdoor unit types, proceed
similarly as appropriate.
* cfr. → 1 Model range, p. 8
Aquarea air-to-water heat pumps - Planning and installation manual - 01/2018
Installation
Compact devices
1
2
2
3
1
1
A compact device of the B9* model is shown as an
example. For other compact devices of the B8* model,
proceed in exactly the same manner as appropriate.
151