Cleaning - UNITED OFFICE ULG 300 B1 Operating Instructions Manual

Cleaning

DANGER
Risk to life from electrical current!
► Remove the power plug from the mains socket before starting to clean the
appliance .
► Ensure that no moisture can penetrate the device during cleaning .
► Never immerse the appliance parts in water or other liquids!
► Never open the appliance housing . There are no serviceable parts whatso-
ever inside .
CAUTION
Possible damage to the device .
► Do not use aggressive or abrasive cleaning agents, as these may corrode
the surface of the casing .
♦ Clean the housing of the appliance only with a lightly moistened cloth and
a mild detergent .
Cleaning the inside of the appliance:
During every lamination, contaminants collect on the rollers inside the laminator .
Over time, this adversely affects the performance of the laminator . Therefore, you
should clean the rollers inside the laminator after every use .
Prepare the appliance as described in the section Preparing for hot
♦
lamination, until the green indicator lamp "Ready" 6 lights up .
♦ Then insert a sheet of A3 paper folded in the middle (maximum thickness
1 .0 mm), without a pouch and with the fold at the front, slowly into the slot
for manual pouch insertion 5 .
♦ Release the sheet as soon as you notice that it is being pulled in automatically .
The contaminants on the rollers inside the laminator now firmly attach them-
selves to the sheet of paper . The paper is ejected from the pouch slot 0 of the
laminator .
♦ Repeat this cleaning process several times . Use a fresh sheet of paper each
time .
When you no longer see any contaminants on the paper, the rollers inside the
laminator are clean .
■ 28 │ GB │ IE
ULG 300 B1