Table of Contents
Advertisement
Setup
Read all manufacturer's warning and MSDS to
know the specific hazards of the material used.
Read Supply Systems Manual included with your
machine. See Related Manual section for more
information.
The machine is assembled on a heavy-duty steel
frame that accepts all the major operating
components. The machine will arrive from the
factory pre-assembled, and ready for installation.
Setting the unit in place, providing electric service to
the main electric console (if equipped), and
connecting the air supply is required.
Prior to installing the machine, check for any
damage that may have occurred during transit. If
any damage is found notify Graco immediately.
The machine is to be installed on a flat surface in an
area that permits easy access to all areas of the
machine for maintenance and operation. The
machine is designed for indoor use only.
The machine has been designed and labeled to
prevent the accidental connection of chemical hoses
to the wrong source. The A Resin component is
labeled as A, A1, or A2 and is color-coded with
yellow. The B catalyst component is labeled as B,
B1, or B2 and is color-coded with blue.
We recommend the system be installed and
commissioned by one of our factory-trained
technicians.
312767B
33
Advertisement
Table of Contents
