NTI RACKMUX-4K17 RACKMOUNT 4K LCD MONITOR WITH KEYBOARD AND MOUSE
Connect to a CPU
Connect the RACKMUX to a USB CPU with either an HDMI or Display Port type video port.
For connection to a USB CPU with
HDMI video port, use the HD-6-MM and USB2-AB-2M-5T cables supplied as shown in Figure 9.
Longer cables are available
(see page 1).
Figure 9- Connect a CPU
Connect Extra Device
On the front of the RACKMUX is an additional USB Type A port to be used, if desired, for an extra accessory. Any low or full
speed USB device may be connected to this port to be used. This port is fully compliant with USB standard 2.0 and earlier.
Note: In order for the optional USB device port to be usable, the USB port on the rear of the RACKMUX must be
connected to a USB enabled CPU (a 2 meter USB cable is supplied).
Note: If a USB keyboard or mouse is connected, operation of the RACKMUX keyboard or mouse may cause
unpredictable results. Do not try to use both mice or both keyboards at the same time.
Figure 10- Connect a USB 2.0 device to the front (optional)
7