Table of Contents
Advertisement
NTI RACKMUX-VS17-T RACKMOUNT LCD MONITOR WITH SUN KEYBOARD AND TRACKBALL MOUSE
Optional Telco 2-Post Mounting
If the Telco 2-post mounting bracket kit (NTI# RL-T15-TEL) is to be used, secure the short and long brackets to each side of the
drawer as shown in Fig. 2.
Apply 2 nuts (supplied) per bracket to secure the brackets to the drawer. Apply two #10-32x3/4"
screws (supplied) per bracket to the post at the desired height.
adjustments easy.
Be sure to properly tighten all nuts and screws before using the drawer.
Connect to a CPU
The RACKMUX-VS17-T may be connected to a USB CPU with a VGA video port using the USB-AB-2M and VEXT-6-MM cables
provided as shown in Fig. 4.
NTI
1275 Danner Dr
Aurora, OH 44202
www.networktechinc.com
Figure 3- Mount to Telco post with optional mounting brackets
REAR VIEW OF RACKMUX-VS17-T
NETWORK
TECHNOLOGIES
INCORPORATED
Tel:330-562-7070
Fax:330-562-1999
USB Type B
Male
USBVEXT-xx-MM
15HD Male
Video Connector
Figure 4- Connect a SUN USB CPU
Slots are provided in the brackets to make minor depth
USB Type A Male
4
SUN USB CPU
Advertisement
Table of Contents
