Optional Telco 2-Post Mounting; Connect To A Cpu; Figure 3- Mount To Telco Post With Optional Mounting Brackets; Figure 4- Connect A Ps/2 Cpu - NTI RACKMUX-V15 Installation And Operation Manual

NTI RACKMUX-V15/17 RACKMOUNT LCD MONITOR WITH KEYBOARD AND MOUSE

Optional Telco 2-Post Mounting

If the Telco 2-post mounting bracket kit (NTI# RL-T15-TEL) is to be used, secure the short and long brackets to each side of the
drawer as shown in Fig. 2. Apply 2 nuts (supplied) per bracket to secure the brackets to the drawer. Apply two #10-32x3/4"
screws (supplied) per bracket to the post at the desired height.
adjustments easy. Be sure to properly tighten all nuts and screws before using the drawer.

Connect to a CPU

The RACKMUX may be connected to either a PS/2 or a USB CPU with a VGA video port.
VEXT-6-MM cable and VVKINT-6-MM cable as shown in Fig. 3.
AB-2M cables as shown in Fig. 2.
NTI
1275 Danner Dr
Aurora, OH 44202
www.networktechinc.com

Figure 3- Mount to Telco post with optional mounting brackets

REAR VIEW OF RACKMUX-KVM
NETWORK
TECHNOLOGIES
INCORPORATED
Tel:330-562-7070
Fax:330-562-1999
6 miniDIN Male
Purple-Keyboard
VVKINT-6-MM
(supplied)
6 miniDIN Male
Green-Mouse
VEXT-6-MM
(supplied)

Figure 4- Connect a PS/2 CPU

Slots are provided in the brackets to make minor depth
To connect to a PS/2 CPU, use a
To connect to a USB CPU, use the VEXT-6-MM and USB-
15HD Male
Video Connector
4
PS/2 CPU