Display Functions; Standard Controls; Osd Control Menu- 17.3 Inch Hi-Definition 4K Monitor; Figure 12- Osd Controls - NTI RACKMUX Series Installation And Operation Manual

NTI RACKMUX-4K17 RACKMOUNT 4K LCD MONITOR WITH KEYBOARD AND MOUSE

DISPLAY FUNCTIONS

An NTI RACKMUX with a 17" monitor supports resolutions up to 3840 x 2160 @ 30Hz (1080p @ 60Hz). The quality of the image
on the LCD monitor is adjustable using an On Screen Display (OSD) menu using the control buttons on the RACKMUX.

Standard Controls

The RACKMUX has 5 standard control buttons and a power LED. The 5 standard control buttons operate as follows:

The Power button turns the RACKMUX LCD Monitor and backlight ON and OFF as desired.

The Power LED located immediately to the left of the Power button is a dual color LED. It will illuminate with a green color
when the RACKMUX is powered ON and has video sync. It will illuminate with a red color if the RACKMUX is powered ON
but there is no input signal detected.

The Menu/Select button is used to bring up the OSD menu where the various settings of the LCD display can be adjusted.
Once the OSD screen is displayed, the Menu/Select button is used to make selections within the menus.
Control Menu" (below) for more on LCD display settings.

The Up and Down Arrow buttons are used to navigate through the menus. Move the cursor up or down as desired to
highlight an item for selection. Once an item is highlighted, pressing the Menu button will select it.
The Exit button will exit the OSD menu when visible.


OSD Control Menu- 17.3 Inch Hi-Definition 4K Monitor

The OSD (On Screen Display) Menu enables the user to select the desired characteristics of the LCD display. To activate the
OSD Menu, press the Menu button (below).
approximately 10 seconds (timing is adjustable) and it will automatically be cleared from the screen.
exiting the menu will be saved.
To turn the Menu back OFF, either press the Exit button or just wait

Figure 12- OSD Controls

9
See "OSD
Any changes made before